Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Corte Madera, CA
Corte Madera homeowners burn wood episodically, not constantly, and that single fact shapes almost everything we do here. Holiday fires and rainy-weekend ambiance leave behind the sticky, glazed creosote of infrequent hot burns rather than the steady ash of a heating-dependent town, so a chimney inspection in Corte Madera is less about volume and more about what’s quietly building up between seasons. We’re Juniper Chimney Sweep, and we handle the full flue system – sweeping, inspection, and repair under one company. Call (866) 361-9755 to book.
Why Corte Madera Homes Are Different
The flats between the Tiburon peninsula and the Mt. Tam foothills sit in cool marine air, with foggy summers and mild, wet winters. Burning season here is short and packed into late fall through early spring, and that damp air does two things at once: it encourages creosote to glaze into a hard, tar-like stage-3 layer, and it corrodes chimney caps and dampers between seasons.
Housing stock matters too. Most homes are mid-century single-story ranches and split-levels from the 1950s through the 1970s, and many have been retrofitted with gas or wood inserts dropped into older masonry fireplaces. In the 94925 flats, a notable share were rebuilt or raised after the 1980s-era flooding, so newer framed flues with factory-built inserts sit right alongside older masonry chimneys on the same street.
Then there’s the tree cover. Corte Madera’s lots are low and often shaded by redwoods, and caps clog with needles and debris that restrict draft. An unswept flue here is both a fire risk and a compliance question under Marin County’s winter Spare the Air wood-smoke rules.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Corte Madera Services
Two things bring most Corte Madera homeowners to us: a chimney that needs a proper sweep, and damage that a sweep or inspection turned up.
Chimney Sweep in Corte Madera
Because burns here are episodic, a standard brush-out doesn’t always cut it. Glazed stage-3 creosote bonds to the flue tile and needs mechanical removal, and rusted dampers often show up in the same flue. We sweep the firebox, flue, and smoke chamber, then show you what came out and what it tells us. Redwood needles packed into a cap get cleared at the same time, which usually restores draft on the spot. If it’s been more than a season, book a chimney sweep before the first cold snap and you’ll know exactly where your flue stands.

Chimney Repair in Corte Madera
The damp marine climate is hard on caps, dampers, and crowns, and the mix of older masonry and retrofitted inserts means repairs vary widely from house to house. We diagnose first, then fix what’s actually failing rather than replacing a whole system on a hunch. Deteriorated flue tile can often be restored with HeatShield rather than torn out, and we install DuraFlex flexible stainless liners where a flue is aged or offset. When something needs real repair, you can get chimney repair from the same company that found the problem.

Chimney Inspection in Corte Madera
Chimney inspection in Corte Madera answers a question the fog belt makes hard to see: what’s actually inside the flue after a short, damp burning season. The mid-century ranches and split-levels here hide a lot – an insert retrofitted decades ago into an original masonry firebox, a flue that was never sized for the appliance now sitting in it, a cap packed with redwood debris. Because most Corte Madera homeowners burn episodically, the creosote that forms is glazed and sticky rather than powdery, and it doesn’t announce itself. An inspection is how you find out whether the flue is sound or quietly failing. We can inspect your chimney and give you a straight read on it, with camera evidence you can look at yourself rather than a verbal verdict you have to take on faith.
Fireplace Inspection
Signs you need it
A smoky fire that used to draw fine, or a firebox with cracked brick joints and crumbling mortar, usually means the fireplace itself needs a closer look.
What it costs in Corte Madera
A fireplace inspection typically runs $99 to $175 here, and the written estimate sets the final price.
How we do it
We examine the firebox, damper, smoke chamber, and the first stretch of flue, check clearances to combustibles, and photograph anything that needs attention.
Chimney Flue Inspection
Signs you need it
Glazed creosote, a flue that smells strongly between fires, or a liner you’ve never actually seen are all reasons to have the flue looked at directly.
What it costs in Corte Madera
Flue inspection typically costs $125 to $225 in Corte Madera, depending on access and whether camera work is needed.
How we do it
We run a camera down the full length of the flue, measure the liner against the appliance, and record what we find so you can see the condition for yourself.
Level 2 Chimney Inspection
Signs you need it
A home sale, a new appliance, a chimney fire, or any change to the flue system calls for a Level 2 inspection rather than a basic visual check.
What it costs in Corte Madera
A Level 2 inspection typically runs $199 to $350 in Corte Madera, with the written estimate setting the final price.
How we do it
We inspect every accessible part of the chimney and flue with video equipment, check the attic and crawl spaces for clearances, and document the whole system in a photo report.
Chimney Fire
Signs you need it
Puffy, honeycombed creosote, heat-damaged tile, or a loud roar from the flue during a burn are all signs a chimney fire has already happened.
What it costs in Corte Madera
Assessing a chimney after a fire typically costs $199 to $350, and any repair beyond that is quoted separately.
How we do it
We camera the flue for cracked tile and damaged joints, check the cap and crown for heat damage, and tell you plainly what’s safe to keep using.
What Chimney Inspection Costs in Corte Madera
| Item | Typical range in Corte Madera |
|---|---|
| Fireplace inspection | $99 – $175 |
| Flue inspection | $125 – $225 |
| Level 2 inspection with camera and photo report | $199 – $350 |
Do I really need a Level 2 inspection to sell my house in Corte Madera?
Most buyers and their insurers expect one, and many Marin real estate transactions won’t close without documentation of flue condition. It’s also the right call after any chimney fire or appliance change. Call (866) 361-9755 for an exact quote – estimates are free.
How often should a Corte Madera chimney be inspected?
Once a year is the standard, even with light burning, because the short damp season here still builds glazed creosote and corrodes dampers. If you burn only a handful of fires, an annual inspection catches problems before they turn into repairs. Call (866) 361-9755 to schedule.
Brands We Service in Corte Madera
We supply and install professional-grade components from brands chimney engineers specify: DuraFlex flexible liners, HeatShield restoration systems, and Olympia Chimney venting. We also work with Famco and Copperfield parts for caps and dampers. We don’t claim to stock parts, but we can walk you through our brands and what turnaround to expect on each.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Corte Madera, CA
| Service | Typical range in Corte Madera |
|---|---|
| Fireplace inspection | $99 – $175 |
| Flue inspection | $125 – $225 |
| Level 2 inspection with camera and photo report | $199 – $350 |
| Standard chimney sweep | $175 – $299 |
| Sweep with glazed creosote removal | $249 – $399 |
| Chimney cap replacement | $199 – $425 |
| Damper repair or replacement | $225 – $550 |
| Crown repair | $275 – $750 |
| HeatShield liner restoration | $1,800 – $5,500 |
| DuraFlex stainless liner installation | $2,800 – $7,500 |
Two things push price up in Corte Madera: glazed stage-3 creosote takes mechanical work rather than a quick brush-out, and an insert retrofitted into an old masonry flue usually needs a liner sized to the appliance. You’ll get an upfront written price before we book, and that estimate is what you pay.
Neighborhoods We Serve in Corte Madera
We work across the flats and lower slopes of Corte Madera, from the older masonry chimneys near the 94925 flats to the newer framed flues on the raised lots. Tree-shaded properties tend to need cap clearing more often, and the split-levels with retrofitted inserts always get a closer look at liner sizing. Because we’re scheduling around Corte Madera homes, we can usually find you an opening within the week – though winter fills up first, so book ahead if you’re burning through the holidays.
- The flats near the 94925 core
- Lower slopes toward the Mt. Tam foothills
- Lots along the Tiburon peninsula side
- Tree-shaded mid-century streets off the main corridors
Service Area – Cities Near Corte Madera
We work in Corte Madera and the surrounding Marin and East Bay communities. If you’re just across the water or down the peninsula, we can help there too – see our pages for Tiburon, CA, Richmond, CA, San Pablo, CA, and El Cerrito, CA. Same professional-grade components, same camera inspection and photo report, same upfront written pricing wherever you are.
Serving Corte Madera, CA – Our Local Coverage Area
We serve Corte Madera and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Corte Madera
Yes. We cover the full town, from the 94925 flats to the lower slopes toward the foothills. Call (866) 361-9755 and we’ll confirm your address and find you an appointment. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Some chimney repairs, especially anything structural like a crown rebuild or a new liner, may require a permit from the town’s building department. HOA rules can apply too. Ask before you book, and we’ll tell you what the work involves so you can check what’s required.
We schedule appointments throughout the week. Winter is the busy season because of Spare the Air days and holiday fires, so booking ahead helps. Call (866) 361-9755 for the next available opening – estimates are free.
If your Corte Madera chimney needs a look, call Juniper Chimney Sweep at (866) 361-9755 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Corte Madera Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Matt Thompson"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Javier Flores"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Veronica Vargas